My ez pass is not being recognized since placing it in my model s, was fine in the BMW. Worked when holding it out the passenger window. Anyone else experiencing this, any theories?
I have used the Florida sunpass now for two weeks under the rear view base and seems to be working all the time. Have not had any violations show up on my activity report. I hope it continues to work...
Whoever suggested placing EZ Pass tag on the black plastic part that attaches the mirror to the windshield, thanks! Works flawlessly!
@bp and others:
I have two AVI type stickers (RFID flat sticker mounts), one for the Georgia toll roads (Peach Pass) and one for my work garage.
It took some experimentation, but as a couple of other people already note (and I thought I was going to be the first), I have slide each of them under the black plastic housing of the rear view mirror. I have NOT removed the backing for the sticky side. I think they will stay, or I may use a small piece of double stick tape.
I have tested each, they both work great now. I can post or send pics if anyone needs them.
The peach pass sticker is long and thin, that one is almost completely hidden under the plastic housing.
The work garage AVA is credit card sized and the main part is under the housing (and pushed up under the fabric above) and about 1/3 is exposed.
But it all works!
It would have been very helpful if Tesla had given us easier access to under the nose or the front part of the roof (the 7" wide or so strip that runs between the windshield and the pano roof).
Our new Los Angeles FastTrak needs to be mounted somewhere convenient, because our transponders have a switch to set how many people are in the car, as HOV access/charges on the 110 and 10 freeways varies for time of day and number of passengers.
Fortunately, the spot next to the rearview mirror seems to be working ok for me.
I was faced with the problem of ALSO having an RFID credit-card-style parking pass for work. I was going to just live with swapping it and the FastTrak as needed (fortunately my FastTrak use is mostly on the weekends), but I discovered that velcroing it to the inside of the small triangle of glass at the front part of the driver door works. You could not fit a FastTrak/EZpass there, but for card-style transponders this appears to be an option.
X Deutschland Site Besuchen