Join The Community

Why Aluminum?

Hey guys! Thanks to everyone who gave me feedback for my previous thread. It helped me a lot. I am writing this thread in a form of a question. Can somebody give me a very detailed explanation on why Tesla chose aluminum for Model S and why it is the next-generation material for the automobile industry. Also, can someone tell me why it is better than steel and other materials and how. Thanks so much!

The short answer is weight savings. The majority of this car's weight lies in the batteries, and the car weighs in just under 5000lbs. If the vehicle were made with a conventional steel body and frame you could easily add several hundred more pounds, which would decrease the performance and range. With sufficient engineering the aluminum is just as strong in an accident, while being much lighter. I am not an engineer but I believe that this is the gist of the reasoning. When I worked at Tesla I worked in the battery module line and after that I built and tested superchargers, however I am not an expert on the finer points of the car.

This pretty much says it all: Aluminum to save weight, reinforced steel where it counts.

Aluminum does not corrode as easily (i.e. no rust), so it should hold up better in that regard.

Steel is about three times heavier per volume than aluminum. The weight difference in a car body and chassis is substantial.

The same reason aluminum is used in Festivus Poles.

And the reason aluminum isn't used in all cars is cost.

The other option would be carbon fiber, but that's even more expensive.

If someone ever makes a time machine out of a Model S (a la "Back To The Future"), the car would be worth a fortune. As Brian H has stated previously, aluminum used to be worth more per unit weight than gold. Now we make whole cars out of the stuff and wrap our leftovers in it.

How the world changes from one generation to the next, eh?

Jason_Augustus - If you ever want to share insights that you are able to share (not looking for you to violate an NDA), please do.

Good info.

Is there any hope of aluminum going down in costs if for example more production starts happening? Alternately, is there any other lightweight strong body material showing promise?

I don't think there is much room for aluminum to go down in price aside from macroeconomic demand. It's one of the top commodities out there. Tesla is a tiny player.

Going back in time in a Tesla would be horrible! 120V 20A charging if you're lucky!

Zero-g refined iron has some amazing properties. ;)

Ah have just figured out Space X's real agenda......

@soma: this is apparently a fair amount of manipulation with AL pricing--this was being reportedly widely a few weeks ago:

BMW is on the right track with Carbon Fiber Reinforced Plastic (CRP). This is a way to use the advantages of Carbon fiber without the price problem.

We will find materials that are lighter and stronger than these. But it will take time. Till then aluminium is a great way to loose some weight at minimal cost.

The best way to reduce weight in an EV is for sure the battery.

The use of aluminum isn't just for the weight savings. Using aluminum panels and structural members allows the "crumple" zones to expend more energy from the collision to keep it (said energy) from being transferred to the passengers. This also keeps the occupants from seeing more than a few G's going from whatever speed they are traveling and coming to a complete stop, because the Model S dissipates the energy through the crumple zones.

Think of it like the indy or stock cars, when they wreck, the cage surrounding the driver pretty much stays intact while the rest of the car crumples and parts go flying off taking all the energy of the collision with them.

Sorry, meant to add that steel is not as forgiving as aluminum is the crumple zones. That's what makes it a better energy dissipation material.

@michael1800 - you'd have to take it to the future first, to get it fitted with Nikola Tesla's unrealized invention, the "Self-acting Engine"... or maybe just a Mr. Fusion.

Tesla made the right choice with Al body reinforced with alloy steel. I think that they can still take advantage of the wide variety of specialized alloyed Al to reduce weight. That would include Al-6061 Grades, etc. Stronger steel alloys - even Titanium for critical parts could used. Model S could loose 1,000 lbs while keeping the structural integrity, safety intact. It is a cost/benefit issue.

Elon has access to SpaceX engineers that are experts in this area. Over time we could see gradual improvements.

X Deutschland Site Besuchen