I heard that the new cars are rolling out with a slightly modified front plastic nose cone. Anyone seen it yet or has more info on this ? Is that to better accommodate a front license plate ?
Note sure why they made the change, but there's a good shot of the difference between the original nose cone and the new one in this thread. All production models have the new one (almost all of the US sigs had the old one).
Hmmm, I like the new one better, it's more sleek, aerodynamic then the hard edges on the sigs, I think.
If CA didn't require a front license plate, I think I would have preferred the old one, but I do like the new one with plates.
Maybe aerodynamic change (especially with the plate). Old one has a edge in it that is not into new one, and all sharp edges affect aerodynamics.
gregv64: Thanks for the info. The new cone is definitely better. I like the thinner license plate holder as well.
New one is definitely better but I am a bit worried that we will all end up replacing ours eventually due to the fact that it is the primary impact bumper. I wonder how well it will hold up to typical parking 'kisses'. (No me, the idiot in the pickup...)
This was definitely a changed asked for by the aero guys. The old one has that backward facing step right around the stagnation point. It is possible that this make the boundary layer trip from laminar to turbulent much faster. They are counting on a large laminar region in order to hit their Cd for highway driving.
If they didn't do a detailed CFD model of the final version that the design team came up with before sig production, they might not have caught how big the influence was.
Time for a sig vs non sig controlled range test. :-)
Time for a sig vs non sig controlled range test. :-) (kalikgod)
A top speed test (while tracking the Wh/mi read-out) would clarify the aerodynamic impact much faster, in every way! :-)
I like your idea, but the impact could vary with the change in velocity (Reynolds Number).
So how about a side-by-side empty road run with cruise set at 45 mph, 70 mph, and 95 mph. Need to make sure there is absolutely no traffic (wakes) and hopefully no crosswind. The instruments only display in 0.1 kWh, so would need at least a 10 kWh test, ~50 miles?
I would like to propose a new ‘nose cone’ for the "S." Not changing the new shape, but the material. I doubt any of us are confident that the current cone will hold up well to bumps and bashes. Perhaps TM might consider an old solution. In 1968 Pontiac introduced the “Endura” front bumper on the GTO that held up well to ‘park by touch’ encounters. TM could paint it black or same color as body. Remember the TV commercial(s) extolling the front bumper of a GTO taking a beating from a crow bar or sledge hammer?
“A unique feature was the body-color Endura front bumper. It was designed to absorb impact without permanent deformation at low speeds. Pontiac touted this feature heavily in advertising, showing hammering at the bumper to no discernible effect.” http://en.wikipedia.org/wiki/Pontiac_GTO
Just for laughs I offer this GTO commercial touting Pontiac’s 1968 MTCOTY, etc. Although I doubt many “S” buyers will readily agree that the price is too low. http://www.youtube.com/watch?v=EYPA-Rkuoeg
Speculating here... however, Elon did say all the Sig owners would be getting some special 'extras' to separate them from the general production models (we did pay extra). So, maybe there is something extra hiding under the Sig version nose, that hasn't be activated yet ;-)
Being I haven't had a chance to compare a Sig verse GP (other than CF spoiler, badging, and seats), I am not sure what the differences are?
Talked with my service repabot it when he was out puttin onmy previously back ordered spoiler. We could't understand why they changed it- the sig version allows for an access port to the two 12v posts you have to access if your battery runs down. The new nose cone, you have to remove the entire nose cone if you have to access those posts. He said it is backwards compatible and that he could put the new nose on my car if I wanted. I declined, I like the sig nose better, my own personal preference, and like the fact I can access the 12v posts easily if I ever needed to.
I like the new nose. Slightlty OT< but I also liked how the alpha (or maybe it was even earlier) cars had the Tesla 'T' on the hood, near the edge.
I am not sure i can see the difference?
This looks like possibly the perfect iPhone mount for the Model S (if you have an iPhone 5). Too bad it doesn't come in black. I bet a little spray plasti-...
10,000 kms , in 70 days and no problems
Per Elon at All Things D...after tomorrow's, around June 20 is next (presumably the "fifth" in the trilogy)
X Deutschland Site Besuchen